Tools
- Table saw with 10" fine cut blade
- Band saw able to take material 6" high, with 1/8" and 1/4" blades
- Table top drill press
- Saw toothed Forstner bits; 2 3/4" and 1 1/2" diameter. If you want the
authentic "rear wheel lost in the wheel well" look get a 3" diameter bit as
well. And a 2 1/2" one would save time on the spare tire well.
- Router, Router table, Router bits; 1/2" straight sided, 1/4" quarter round, and 1/2" quarter round
- Dremel tool with straight sided bit, tiny spherical bit and a pointed cone shaped bit.
- Back saw
- Dovetail saw
- Coping saw
- Wood Rasp
- Planes; Jack and Thumb
- Micro file with one side flat the other curved
- "V" chisel
- "C" clamps, squeeze clamps, and pipe clamps
- 1 1/2" wide paint brush
- Various scrap pieces of wood, rags, a knife, combination square with
protractor and centre finding attachments, school geometry set, etc...
<<< Previous
Home
Next >>>